HONMA BERES 10 FOUR-STAR DRIVER — REFINED CRAFTSMANSHIP, EFFORTLESS DISTANCE
The Honma BERES 10 Four-Star Driver occupies the refined middle ground of the BERES 10 lineup — bringing premium ARMRQ shaft technology, full titanium head construction, and Honma's signature luxury aesthetic into a configuration that sits between the benchmark Three-Star and the flagship Five-Star. Every Four-Star driver is custom built by Honma's master craftsmen at the Sakata, Japan facility, with a 4 to 6 week build time from order confirmation to delivery. This is a made-to-order precision instrument, not an off-the-shelf club.
For the 2026 BERES 10 series, Honma made a historic change — discontinuing the entry-level Two-Star grade entirely so the entire lineup now starts at a higher material standard. That means even the Three-Star uses premium TORAYCA M40X carbon fiber, and the Four-Star builds on that foundation with a more elaborately wound shaft for added stability and recovery.
THE ARMRQ SHAFT — TORAYCA M40X CARBON FIBER
At the core of the Four-Star is the ARMRQ Flight shaft built with TORAYCA M40X carbon fiber from Toray Industries — a high-modulus, high-tensile material that balances stiffness and elasticity to a degree most carbon fiber constructions cannot match. In practice, M40X transfers energy through the downswing with minimal loss at impact, accelerating head speed without demanding extra effort from the golfer, while suppressing shaft torque to tighten directional consistency and reduce dispersion on off-tempo swings.
The Four-Star's shaft features a more complex fiber winding than the Three-Star, increasing recovery force and stability through the impact zone — a meaningful upgrade for players who want additional consistency without stepping all the way up to the Five-Star's top-tier construction.
FULL TITANIUM FRAME AND FORGED CUP FACE
The BERES 10 head pairs a Ti811 titanium body with a forged HMT cup face. The cup face construction wraps the face material around the head's edges to extend the flex zone beyond the center, expanding the high-repulsion area so ball speed is better preserved on strikes that miss the geometric sweet spot. The 460cc head maximizes the size allowed under the rules of golf for the largest possible face and highest MOI.
A stainless steel rear weight balancer sits at the back of the head to lower and deepen the center of gravity, promoting an automatic high launch with reduced spin variance. This rear weighting drives the high 4,900 MOI rating, which translates to strong twist resistance and forgiveness on off-center contact — the ball launches high almost regardless of swing, and toe and heel strikes lose very little energy.
LOFT AND FITTING OPTIONS
The BERES 10 Four-Star Driver is available in three loft options — 9.5, 10.5, and 11.5 degrees — each at 45.75 inches. The 9.5 suits players who prefer a flatter, more penetrating ball flight, the 10.5 is the standard balance of carry and roll, and the 11.5 is recommended for slower swing speeds to maximize carry distance. Lie angle is 59.0 degrees at 9.5 and 10.5 loft, and 60.0 degrees at 11.5.
The grip is the GR Honma Rubber 41 GD in Size 60 at 41 grams — a clean, understated rubber grip that balances feedback and cushioning.
LASER-CUT KIRIKO DESIGN — 2026 BERES AESTHETIC
The 2026 BERES 10 design draws on Edo Kiriko, the traditional Japanese cut-glass craft. The laser-cut Kiriko motif on the crown is a contemporary take on the Kiku-Tsunagi pattern, and the contrast between the deep IP finish and the intricate cut pattern shifts with angle and light. The Four-Star grade carries Honma's signature gold detailing that marks its position in the premium tier of the BERES lineup.
CUSTOM BUILD AND DELIVERY
Every Four-Star Driver is custom built to your selected loft and flex at Honma's Sakata, Japan facility. Please allow 4 to 6 weeks from order confirmation to delivery. As an authorized Honma dealer, The Prime Pinnacle manages the order directly and confirms your build specification before submission. Free shipping is included and there is no sales tax outside Florida. Contact our team at support@theprimepinnacle.com or +1 (877) 477-2853 with any fitting, flex, or loft questions before ordering.
HEAD
Model: BERES 10
Body Material: Ti811 titanium — casting with stainless steel weight
Face Material: HMT forged cup face
Head Volume: 460 cc
MOI: 4,900 (10.5 loft)
Available Lofts: 9.5, 10.5, 11.5 degrees
Lie Angle: 59.0 degrees (9.5 and 10.5) / 60.0 degrees (11.5)
Face Angle: S1.0 degrees (9.5 and 10.5) / 0.0 degrees (11.5)
Club Length: 45.75 inches
SHAFT — ARMRQ FLIGHT (Four-Star specification)
Shaft Series: ARMRQ Flight (4-Star)
Carbon Fiber: TORAYCA M40X high-elasticity, high-modulus
Available Flex: S, SR, R, Light R
[VERIFY FROM YOUR PRODUCT DATA — Four-Star balance weights / total weights by flex. Drop in the exact figures from Honma's 4-Star spec table here so the live page matches your GMC feed.]
GRIP
Model: GR Honma Rubber 41 GD
Material: Rubber
Weight: 41g
Size: 60
Honma BERES 10 Four-Star Driver — custom built to selected loft and flex
Headcover
Build and Delivery: Custom assembled at Honma's Sakata, Japan facility. Please allow 4 to 6 weeks from order confirmation to delivery. The Prime Pinnacle will confirm your loft and flex selection before submitting your build order.
Warranty: Honma Golf provides a manufacturer warranty on the BERES 10 series covering manufacturing defects. Contact The Prime Pinnacle at support@theprimepinnacle.com or +1 (877) 477-2853 for warranty support.