HONMA BERES 10 THREE-STAR DRIVER — THE NEW BENCHMARK
The Honma BERES 10 Three-Star Driver is the entry point into the 2026 BERES 10 lineup — and it represents a genuine shift in what "entry-level" means from Honma. For 2026, Honma discontinued the traditional Two-Star grade entirely, which means the Three-Star now ships standard with the same premium TORAYCA M40X carbon fiber shaft technology that was previously reserved for higher grades. This is not a stripped-down starter driver. It is a full-specification luxury driver built to the same head standard as the Four-Star and Five-Star models above it.
Every BERES 10 Three-Star Driver is custom built by Honma's master craftsmen at the Sakata, Japan facility. Please allow 4 to 6 weeks for assembly and delivery — this is a made-to-order precision instrument built to your selected loft, flex, and shaft specification, not a stock club pulled off a shelf.
THE ARMRQ SHAFT — TORAYCA M40X CARBON FIBER
At the core of the Three-Star is the ARMRQ shaft built with high-elasticity TORAYCA M40X carbon fiber — a material that pursues the ultimate balance between fiber strength and elastic modulus. In practice, this means the shaft accelerates head speed efficiently through the downswing with minimal energy loss, while suppressing torque to enhance stability and directional control through impact. The result is effortless-feeling distance and a smooth, stable tempo that rewards consistent swings rather than requiring extra swing effort.
The Three-Star is available with two shaft options: the standard ARMRQ shaft and the ARMRQ Light shaft, giving you a way to fine-tune total club weight and feel to your swing profile.
FULL TITANIUM FRAME AND FORGED CUP FACE
The BERES 10 head is built with a Ti811 titanium body and an HMT forged cup face. The cup face design wraps the face material around the head's edges, extending the flex zone and expanding the high-repulsion area across the face — which means ball speed holds up better even on strikes that miss the center. At 460cc, the head is built to the maximum volume allowed under the rules of golf, maximizing both face size and MOI.
A rear weight balancer lowers and deepens the center of gravity, promoting a stabilized, higher launch with improved control and forgiveness — the 4,900 MOI rating reflects real twist resistance on off-center hits, not just a marketing number.
LOFT, FLEX, AND SHAFT OPTIONS
The BERES 10 Three-Star Driver is available in three loft options — 9.5, 10.5, and 11.5 degrees — each at a 45.75-inch length. Flex options are R, S, and SR, and shaft choice is either ARMRQ or ARMRQ Light. Not every flex is available at every loft — for example, 11.5 degrees is offered only in ARMRQ Light R, while 9.5 and 10.5 degrees offer the full range of R, S, and SR flex. Confirm your exact configuration at checkout or with our team before ordering.
Lie angle is 59.0 degrees at 9.5 and 10.5 degrees of loft, and 60.0 degrees at 11.5 degrees. The grip is the GR Honma Rubber 41 GD, Size 60, weighing 41 grams.
LASER-CUT KIRIKO DESIGN — 2026 BERES AESTHETIC
The 2026 BERES 10 design draws on Edo Kiriko, the traditional Japanese cut-glass craft known for precise geometric patterns and interplay of light and depth. The laser-cut Kiriko motif on the crown is a contemporary take on the Kiku-Tsunagi pattern, and the contrast between the deep IP finish and the intricate cut pattern shifts with viewing angle. Finished in Honma's signature gold aesthetic, the Three-Star driver carries the same visual identity as the higher star grades — the differences between star levels live in the shaft construction, not the finish.
CUSTOM BUILD AND DELIVERY
Every Three-Star Driver is custom built to your selected loft, flex, and shaft at Honma's Sakata, Japan facility. Please allow 4 to 6 weeks from order confirmation to delivery. As an authorized Honma dealer, The Prime Pinnacle manages the order process directly and confirms your build specification before submission. Free shipping is included and there is no sales tax outside Florida. Contact our team at support@theprimepinnacle.com or +1 (877) 477-2853 with any fitting, flex, or loft questions before ordering.
HEAD
Model: BERES 10
Body Material: Ti811 titanium — casting with stainless steel weight
Face Material: HMT forged cup face
Head Volume: 460 cc
MOI: 4,900 (10.5 loft)
Available Lofts: 9.5, 10.5, 11.5 degrees
Lie Angle: 59.0 degrees (9.5 and 10.5) / 60.0 degrees (11.5)
Face Angle: S1.0 degrees (9.5 and 10.5) / 0.0 degrees (11.5)
Club Length: 45.75 inches
SHAFT — ARMRQ FLIGHT
Shaft Options: ARMRQ / ARMRQ Light
Available Flex: R, S, SR (availability varies by loft — confirm exact combination at order)
Balance Weight by Flex:
S flex: D2 / 291g
SR flex: D2 / 288g
R flex: D1 / 284g
Light R flex: D1 / 282g
Available Variant Combinations: 9.5/R/ARMRQ, 9.5/S/ARMRQ, 9.5/SR/ARMRQ, 10.5/R/ARMRQ, 10.5/R/ARMRQ Light, 10.5/S/ARMRQ, 10.5/SR/ARMRQ, 11.5/R/ARMRQ Light
GRIP
Model: GR Honma Rubber 41 GD
Material: Rubber
Weight: 41g
Size: 60
Honma BERES 10 Three-Star Driver — custom built to selected loft, flex, and shaft
Headcover
Build and Delivery: Custom assembled at Honma's Sakata, Japan facility. Please allow 4 to 6 weeks from order confirmation to delivery. The Prime Pinnacle will confirm your loft, flex, and shaft selection before submitting your build order.
Warranty: Honma Golf provides a manufacturer warranty on the BERES 10 series covering manufacturing defects. Contact The Prime Pinnacle at support@theprimepinnacle.com or +1 (877) 477-2853 for warranty support and claims.